Richmor Technology adopts Al imaging technology to develop professional vehicl passenger counting system, 

which has the characteristics of high integration, accuracy and easy installation, and it is widely used in public bus, coach,

tour bus and other vehicles. Richmor passenger counting system has high accuracy up to 99%, it can accurately countthe number of passengers getting on and off the bus, even in different light and weather environment At the same time, the passenger flow data can be transmited to the platform by connecting the Richmor MDVR, so asto realize the analysis and management of passenger flow data.

Main features
1.1 channel 1080P analog high-definition video input
2.WIFI, 4G, BD/GPS, G-Sensor
3.SD Card Storage MAX 512G
4.Support start and stop control
6.Support seatbelt detaction
7.Supports speed limit and supports Hall speed sensor access (indoor speed sensor)
8.DMS supports face recognition, smoking recognition, and helmet recognition (optional)
9.BSD function(optional)

H.265 hard compression mode, maximum support for full real-time 8-channel 1080P; 5-channel audio input (including 1-channel MIC intercom input)
Integrate ADAS forward advanced driving assistance system+DSM dangerous driving behavior warning technology;
Built-in thermal printer, integrated pickup, integrated TTS function
Front window display: 132 * 64 dot matrix screen
Built-in 3.7V/600mAh backup battery. Support GPS upload after vehicle power failure
It supports 2 SD cards for storage, with a maximum of 256GB per card; Two high-speed USB2.0 interfaces;
Support 4G network; Built-in Beidou GPS dual-mode and G-sensor gyroscope.
Support 10-way alarm input (2-way analog quantity+8-way IO alarm input); 2-way switch value alarm output, supporting linkage audible and visual alarm, fuel cut-off and power failure. Support 2-way CAN interface, 2-way RS232, 1-way RS485
Support card reader, voice intercom and mobile phone call. Expandable fuel sensor and other peripheral devices
Power supply: support 8V-36V. External dimension: 180mm * 53mm * 170mm

 Detailed Specification

1. Integrated 4G/3G  module, enabling remote monitoring and management with CMS.
2. Integrated GPS/BD positioning module to manage speed, location, time and route. Support positioning module abnormality and antenna abnormality alarms.
3. Support connecting external speed sensor, realizing accurate positioning in the absence of satellite signals indoors.
4. Built-in 3-axis G-SENSOR to realize automatic alarm uploading of abnormal vibration, rollover, impact, etc.
5. Integrated WIFI module to support fast configuration with mobile phone under AP mode.
6. Made of cast aluminum+PC+ABS+nylon plastic material. It is light-weight and is waterproof and vandal-proof (IP67, 2-meter drop resistance), suitable for outdoor work, rain-proof, and not easy to be damaged.
7. The mounting bracket is professionally designed to adapt to different car models (adapted to square/round tubes). Can be installed on A-pillar or B-pillar.
8. The whole device can be adjusted up, down, left and right to achieve the best monitoring angle. After adjusting to the appropriate position, it is locked and fixed with screws to prevent the driver from adjusting the camera angle and to prevent shock. Supports 355° left and right, 90° adjustment up and down.

9. Ultra-high integration, built-in camera, infrared lights (supports monitoring in low-light and no-light environment), GPS antenna, 4G antenna, WIFI antenna. Simple and convenient installation and connection.
10. The whole machine has an extremely high reliability design and can achieve continuous monitoring in an environment of -30°C to 75°C.
11. Has good anti-tamper and dustproof design to ensure that the TF card, SIM card and connection port are not damaged.
12. 1 channel audio input. Integrated high-sensitivity MIC, can record audio, and supports voice intercom.
13. Integrated speaker that can perform audio broadcasts and early warning prompts.
14.  5 status indicators, which can observe the working status of the device in real time.
15. An external alarm button (SOS) is connected, which supports the alarm button to trigger emergency alarm and capture pictures.
16. Supports navigation line separation and area entry and exit alarms. The device can save up to 16 lines and areas.
17. 9V~110V adaptive wide voltage input, ultra-low power consumption. Support reverse connection protection, overvoltage, overcurrent and overload protection, support 12V power output.
18. Supports TF card storage, a single card supports up to 512G, and supports hot swapping.
19. 3 channels of alarm input, 1 channel of alarm output (supports relay control of vehicle start and stop). 1 channel of RS232. Supports extended serial port, external sound and light alarm or LED light/reminder screen.
20. Support Face ID and DSM function. Can connect one channel of blind spot camera can realize blind spot warning function.
21. Ultra-low power consumption design, less heat generation and fast startup! Professional platform software can realize remote monitoring and management functions of computers and mobile phones.

Advantages:
1) Easy to install. 
The counting camera looks like normal dome camera. Easy to install and save space.

2) Easy to do configuration.
All settings are done on the device and save time, while traditional counter need to be set with PC.

3) Higher accuracy, up to 99%
With true AI chipset, it can count passengers one by one, in two, getting up and off at the same time, etc. perfectly!!

4) More competitive price.
Price decreases around 10% compared to traditional version.

5) Support ADAS, DSM, HOD etc driving safety assistant functions.

Brand Name:Richmor
Alarm In/Out:2/1 CH
Special Function:3G, 4G, GPS, Wifi
Video Compression:H.265
Place of Origin:Guangdong China
Warranty:12 Months
Storage:2*256GB SD Card
Video Compression Format:H.265
Product name:car dvr 4ch camera
Voltage:10-36V
Video/Audio Input:8 CH
Model Number:BK6I-E
Resolution:1080P/720P/CIF/HD1/D1, OPTIONAL
Packaging Detail:1 kit in a box.
Selling Units:Multiple of 5
Package size per batch:30X40X30 cm
Gross weight per batch:7.5 KG