How do I install network cameras?
richmor
richmor.net
2017-09-26 19:45:42
The settings for a network camera are usually as follows:
A: set the network camera fixed IP
First connect the network camera and power cable (cable to power), and then with the webcam with a router under computer camera settings, search the LAN through the camera manufacturers to provide CD search software or manufacturers designated network IP address, if you do not have to computer in the same network, please send your computer to the same segment first set camera (camera to automatically obtain the general default IP or 192.168.1.* or 192.168.0.*);

A: set the network camera fixed IP
First connect the network camera and power cable (cable to power), and then with the webcam with a router under computer camera settings, search the LAN through the camera manufacturers to provide CD search software or manufacturers designated network IP address, if you do not have to computer in the same network, please send your computer to the same segment first set camera (camera to automatically obtain the general default IP or 192.168.1.* or 192.168.0.*);
To search the camera after entering the factory default IP browser through the software according to the instructions or CD or enter a user name and password. Richmor-China Professional Vehicle 3g Gps Tracking Camera supplier.
If the page OCX controls the download link to download and install the controls, and then enter the interface, find the network settings, corresponding to your actual network situation, fixed in Network IP, the mode is generally 192.168.*.*; Richmor as a professional manufacturer, we focus on providing customers with the most advanced hd car dvr camera system.
Two: set routing port mapping
Enter the router (routing address is 192.168.1.1 or 192.168.0.1, anyway, to use your routinginstructions to access the correct address and use the correct username and password), find the port mapping interface, port mapping called some routing is not necessarily the same, such as some called "virtual server", distinguish and understand.

Enter the router (routing address is 192.168.1.1 or 192.168.0.1, anyway, to use your routinginstructions to access the correct address and use the correct username and password), find the port mapping interface, port mapping called some routing is not necessarily the same, such as some called "virtual server", distinguish and understand.
Then set the port mapping according to the actual IP and port network camera you first set, our IPCM series cameras only need to set up a 80 port, and IDS series set 80 and 4000 to two ports, UZF Series 80, 8090, 8091 set of three ports, please refer to the specific network camera manual. Note that Unicom in some areas is blocking 80 ports, using non 80 ports, such as 81, 82, and so on.
For more information please click IR CAR Camera supplier china.
