The battery when the cable is connected properly
richmor
richmor.net
2018-05-10 10:24:26
It's very likely that you have a similar experience when you start your car, you hear only buzz, not the sound of the engine. This is caused by the lack of battery power.But,do you know ,in most cases, it is caused by human error (is it not a matter of staying in the interior lights?) Richmor is a vehicle video recorder wholesales china which produced many kinds of vehicle mobile DVR(Digital video camera).


Dumping load is another condition that engineers must make the system tolerate and overcome when designing the system. Because it is related to the system's own problems, this situation is not caused by human error such as battery back-connection.

Automotive system designers must be prepared to deal with two situations that may be caused by mistakes made while riding a car: battery reverse, dual battery condition. When the red end of the jumper cable is connected to the battery ground, and the black end is connected to the positive pole of the battery, the battery reverse connection will occur. In this case, the opposite is true to the connection in Figure 1. In this case, one diode will protect the system, but at the same time, one diode will produce system losses during normal operation. Depending on the system power rating, the forward voltage drop can be anywhere from 0.5V to 1.0V. In this way, a lot of heat is generated and overall system efficiency is reduced.Richmor is a car monitor wholesales china which has advanced technology.Its products include 8ch or 4ch mobile Digital Video recorder.
Trucks and buses have two batteries connected in series while the car has only a single battery. The only vehicle that may be nearby to give you a ride is a truck. This creates a dual battery condition where the voltage applied to the entire system is now doubled. This puts a lot of pressure on the system.
Trucks and buses have two batteries connected in series while the car has only a single battery. The only vehicle that may be nearby to give you a ride is a truck. This creates a dual battery condition where the voltage applied to the entire system is now doubled. This puts a lot of pressure on the system.

Dumping load is another condition that engineers must make the system tolerate and overcome when designing the system. Because it is related to the system's own problems, this situation is not caused by human error such as battery back-connection.
If you want to get more information about vehicle mobile DVR,please click this vehicle safety AHD mobile DVR.